Firewall APU1D4

You are here

225,00 € Exc. VAT
270,00 € Inc. VAT
firewall apu1D4 front view
buy APU1D4 firewall appliance
Disk - CF
Select the disk(s) that will be installed in your appliance.
Operating System
Select the system you wish to have installed.
Professional support
Select an optional support for the pfSense® or OPNSense® software.
Professional support by OSNet team.
Warranty
Hardware warranty extension
Wireless Module
Select your optional wireless module
Cable
Select optional cabling needed to help administer your appliance.
pfSense® or OPNSense® software training
Select your training session

Discover the new APU1D4 based on AMD G series CPU  1GHz with 64 bit support and 512Mo L2 cache - 4Go of DDR3 RAM - 3 Realtek GbE interfaces.

Small… but powerfull !!

 

Firewall is delivered with the following :

  • 1 Firewall APU1D4
  • 1 enclosure
  • 1 power cable

 

firewall apu1D4 front view
buy APU1D4 firewall appliance


Introduction to wle200nx wireless card in PDF. 

PDF Produit: 

Enclosed in the APU1D:

  • CPU: AMD G series T40E, 1 GHz dual Bobcat core with 64 bit support, 32K data + 32K instruction + 512K L2 cache per core
  • DRAM: 4 GB DDR3-1066 DRAM
  • Storage: Boot from SD card (connected through USB), external USB or m-SATA SSD. 1 SATA + power connector.
  • 12V DC, about 6 to 12W depending on CPU load. Jack = 2.5 mm, center positive
  • Connectivity: 3 Gigabit Ethernet channels (Realtek RTL8111E)
  • I/O: DB9 serial port, 2 USB external + 2 internal, three front panel LEDs, pushbutton
  • Expansion: 2 miniPCI express (one with SIM socket), LPC bus, GPIO header, I2C bus, COM2 (3.3V RXD / TXD)
  • Board size: 6 x 6" (152.4 x 152.4 mm) - same as ALIX.2D13 and WRAP.1E
  • Firmware: CoreBoot.
  • Cooling: Conductive cooling from the CPU and south bridge to the enclosure using a 3 mm alu heat spreader (included).

 

As an option :

  • mSATA 16GB CompactFlash card, Skymedi SK6368 controller

 

  • WiFi Compex WLE200NX card :
  • Atheros XB92 reference design
  • Atheros XSPAN family chipset,P/N AR9280
  • IEEE 802.11n compliant and backward compatible with 802.11a/b/g (802.11n not compatible with pfSense® software)
  • Dual-band 2 x 2 MIMO spatial multiplexing technique
  • Maximum output power 18dBm@802.11a / 20dBm MIMO aggregate
  • Supports up to 300Mbps physical data rates

 

Firewall tested and compatible with OPNSense or pfSense® system v.2.2.x  --  64 bits and many other OpenSource firewalling or VoIP distribution.